How Do You Change The Screen On A Samsung 7
Repair guide : Complete screen Samsung Galaxy S7
Level : Hard Fourth dimension : 55 min Author : Alexandre
3295 people have done this repair successfully ! Why not you?
Is yourSamsung Galaxy S7 calling for help, thanks to it'southward broken screen that is steadily ruining your life? If touch screen or display problems are running on your patience, you're in the right place! With SOSav y'all can solve all your problems! The experts at SOSav have concocted arepair guide to show you how to change the screen of your Milky way S7, providing instructions in detailed and illustrated steps. With a new complete screen, you'll forget all the small problems of daily use of your telephone, and rediscover a like new Galaxy S7 for up to 3 times cheaper than a professional repair.
Problems:
- Broken screen
- Black screen
- Display bug
- Bear upon screen problems
Some communication before you start
Step ane
Earlier proceeding to supervene upon the complete screen of your Milky way S7 you must, for evident safety reasons, turn off your telephone.
To exercise this, agree downwards the off button for a few seconds, then confirm by selecting "turn off"
Step 2
Insert the SIM/micro SD card tray opening tool into the hole on the meridian edge of your phone, every bit seen higher up.
And so gently push the tool in.
Step 3
Next, take agree of the MicroSD/SIM card tray and remove information technology.
Step 4
Use a estrus gun to showtime to soften the glue on the rear console.
The glass rear panel is slightly curved and stock-still well. If you use a hairdryer, pay particular attention to the corners of the glass. Don't hesitate to restart if you experience like information technology hasn't come up unstuck.
Using the suction cup, lift the glass merely enough to insert a opening selection between the frame and the rear console.
And so, slide the opening pick effectually the entirety of the screen.
Step 5
Slide the opening selection around the entire rear panel to ensure information technology'southward completely unstuck and can be lifted.
Then beginning to lift the panel up.
Don't hesitate to oestrus the rear panel again if it doesn't lift off easily.
Step six
Using a cross-headed screwdriver, unscrew the 12 screws that secure the internal frame of the phone, as seen circled in red above.
Step vii
Next, employ the nylon spudger to pull up the meridian of the frame.
Pace eight
And then lift, using the nylon spudger, the central section of the frame.
Step 9
Use the pointed end of the spudger to pull back the aureate adhesive between the bottom function of the frame and the battery.
Step 10
So, lift the bottom of the frame, all the while using the pointed stop of the spudger.
Pace eleven
Adjacent, unscrew the bombardment connector.
Step 12
In guild to soften the glue underneath the battery, rut it for a few seconds with a pilus dryer.
Then, with the flat edge of the spudger, elevator up the battery.
Be careful to not heat the battery too much, as it tin damage it.
Step thirteen
Unfix the battery by lifting its full length.
The battery of your Milky way S7 is at present removed.
Pace 14
Use the pointed end of the nylon spudger to disconnect the modest cable for the internal speaker.
Step 15
Footstep sixteen
The internal speaker of your Galaxy S7 is now removed.
Footstep 17
Using the nylon spudger, disconnect the front photographic camera cable.
Footstep 18
Then have concord of the front camera and remove it using the metal tweezers.
Stride 19
Disconnect the proximity sensor cable from the logic board.
Step twenty
Now, unclip the cable for the volume buttons.
Footstep 21
Carefully disconnect the cable for the complete screen.
Step 22
Using the pointed terminate of the nylon spudger, proceed to disconnect the cable for the ability button.
Pace 23
Disconnect the GSM interconnect cable using the pointed end of the spudger.
Footstep 24
Repeat the footstep above to disconnect the WiFi/Bluetooth interconnect cablevision.
Step 25
Unscrew the connector for the home button from the logic board.
Stride 26
Put the apartment side of the nylon spudger underneath the logic lath in guild to lift it.
Pace 27
Do non remove the logic board completely! It is nevertheless connected to the charging connector.
Unplug the connector in guild to free the logic board.
Footstep 28
Unfix the proximity sensor from the frame.
Step 29
Use the hair dryer to soften the glue between the screen and the screen frame.
Don't hesitate to heat the entire surface for a minimum of 5 minutes.
Next, place the nylon spudger underneath the frame in guild to unfix it.
Repeat this activity on the unabridged bottom of the frame.
Step thirty
Use the opening pick to gently pry upwardly the consummate screen from the edge of the frame.
Simply pry up the edge of the screen, and pay conscientious attention to the shortcut keys at the base of operations of the screen which are glued to the drinking glass.
Step 31
Again use the nylon spudger to lift underneath the screen.
Slide the spudger forth to unfix the LCD from the frame.
The LCD is very thin, you must be patient when y'all unfix it.
Step 32
The consummate screen of your Galaxy S7 is now fully removed.
If the complete screen is broken, supervene upon it with a new one.
Source: https://www.sosav.com/guides/mobiles/samsung/galaxy-s7/complete-screen/
Posted by: chavezhond1975.blogspot.com
0 Response to "How Do You Change The Screen On A Samsung 7"
Post a Comment